RULE Bilge Pump LoPro Sensor 12V 56L/min, for hose 19/25/28mm

Rules submersible pump series RULE LoPro 900 is an extremely flat submersible pump which can also be used in narrow bilges. The pump is available in 2 versions. Model 900D is in conventional design and requires a float switch and/or manual switch. Model 900S has a two-stage adjustable level sensor. The pump starts when the water has reached a height of 3 or 5 cm, depending on the desired setting. The pump will start briefly every 2.5 minutes to check for water in the bilge. If water is present, the pump runs until all water has been pumped away. For easier installation, the diffuser can be rotated continuously by 180°. The threaded design of the diffuser makes it possible to screw on different outlet pieces. The following outlet connections are included in delivery: 19 mm (3/4″) straight and angled as well as for 25 mm (1″) and 28 mm (1 1/8″) hoses. The non-return valve prevents water from flowing back into the bilge. Series 900 can be installed horizontally or vertically.