SHARKBITE WATERLINE CLEANER 0.5L

Use:
Sharkbite Waterline Cleaner is effective against dirt and stains, yet gentle on antifouling, lacquered surfaces, wax and the environment.
Spray onto the surface, leave for about a minute and rinse thoroughly with water. You will see dirt and stains run off and the boat get a fresh look.
The product is biodegradable.

Instructions:
For the best result, read the instructions below before use.
Use on metal surfaces
With some metals it may be necessary to dilute the product with water. Always rinse thoroughly with water to avoid corrosion.
The product is very effective, so always test on a small area first. Discolouration or a flame-like surface effect may occur on certain metal surfaces. Long-term exposure to seawater, lake water or acidic rainwater often causes a similar surface change in metal.

Warm working temperature = faster cleaning:
The product acts quickly and effectively, and the effect is enhanced in warm conditions. The higher the temperature, the faster the cleaning, so rinsing should be done immediately after treatment.
Try on a small area first. Then decide whether to treat area by area or the whole boat at once. In cold conditions the action time is longer. In that case, let the product act a few minutes longer.

Rinse thoroughly:
Rinse the treated surface thoroughly with water so that no residues remain that could affect the hull, metal, plastic, rubber surfaces or PVC materials over a long period, for example during winter storage.
Work systematically. Spray one area at a time and rinse before moving on to the next.

Important:
Sharkbite Waterline Cleaner must not be stored below +10 °C.