Sea-Fire is the world’s leading supplier of fire extinguishing systems for the engine rooms of pleasure boats and smaller commercial vessels. A large part of the world’s boat builders install Sea-Fire fire extinguishing systems on their boats as standard equipment.
Sea-Fire fire extinguishers have either automatic and/or mechanical activation. In Sea-Fire automatic fire extinguishing systems, the system is activated automatically when a fire is detected and extinguishing begins without manual start.
The extinguishing agent in Sea-Fire devices is ‘3M™ developed Novec™ 1230 fire protection fluid’, which has an extinguishing effect based on cooling. Novec™ 1230 is liquid in the bottle and turns into gas when the pressure is released. It evaporates quickly and leaves no residue.
• Fast – Extinguishment occurs in seconds (10 or less)
• Effective – The extinguishing agent is designed to control and extinguish a fire at its inception, before it can spread. The extinguishing agent is non-conductive and non-corrosive, so electronic and sensitive mechanical equipment will not be damaged.
• Clean – The extinguishing agent quickly vaporizes into a gas during discharge and evaporates cleanly without leaving any residue, meaning there is no need for post-cleaning.
• Safe – The system is safe to use even in areas where people are present. Novec™ 1230 is non-toxic.
• Environmentally friendly – The extinguishing agent does not deplete the ozone layer and its life cycle in the atmosphere is short.
The extinguisher is preferably installed in a vertical position so that the extinguishing agent can be discharged as freely as possible into the protected space. The extinguisher must not be installed completely horizontally, but care must be taken that the trigger head/gas discharge head is at the top in all situations.
The model must be selected according to the gross volume, (the engine volume must not be reduced).
Only one tank / engine compartment. A mounting bracket is supplied with the extinguisher.













