Barnacle Remover removes barnacles from outboard motors and boat bottoms in no time.
• Spray application
• Barnacles are easy to scrape and rinse off
• Does not damage adjacent surfaces
• Removes minor rust damage from aluminum and bronze
INSTRUCTIONS FOR USE
Pre-treatment:
For best results, scrape off most of the barnacles except the bottom before spraying Barnacle Remover on them.
Method:
Spray Barnacle Remover onto the barnacles and let it sit for a few minutes. Remove the barnacles with a pressure washer and/or by gently scraping. Repeat if necessary. Rinse with fresh water.
Tips:
Mixing Shake before use.
Important information:
Barnacle Remover contains hydrochloric acid. Read and follow the health and safety instructions on the label carefully. Remove the nozzle and rinse with water immediately after use. Close the bottle with the original cap. The product temperature must be between 5°C and 35°C. The ambient temperature must be between 5°C and 35°C. The substrate temperature must be between 5°C and 35°C.
Compatibility/Substrates:
Suitable for all materials and puttyed surfaces.
Application methods: Spray













